상품명 | Clutch Retainer Allen Screw in Titanium Grade 5 6Al4V "Limited Edition" RC Project |
---|---|
제조사 | RC PROJECT |
판매가 | 19,800원 |
적립금 | 198원 (1%) |
배송방법 | 택배 |
배송비 | 3,000원 (50,000원 이상 구매 시 무료) |
수량 |
SNS 상품홍보 | |
---|
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드수량을 선택해주세요.
위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.
상품명 | 상품수 | 가격 |
---|---|---|
Clutch Retainer Allen Screw in Titanium Grade 5 6Al4V "Limited Edition" RC Project | 19800 (198) | |
총 상품금액(수량) : 0 (0개) |
티타늄 클러치스크류
열팽창률을 고려한 티타늄 소재 채용
3mm 밖에 튀어 나오지 않아 채시가 비틀릴 때 연료통에 닿을 염려가 없다.
1년 개런티-스크류마다 넘버가 새겨져 있음.
The new "Limited Version" Allen Screw is made of Titanium Grade 5 6Al4V certified U.S. derivation, the choice to use Titanium is due to the different thermal expansion compared to Steel; this will make it possible to unscrew/screw without problems the Allen Screw even with the hot engine.
It has a total length of 9mm of which 6mm are of thread and a protrusion from the crankshaft of only 3mm so as to avoid collisions with the tank in case of excessive flexion of the chassis.
The new geometry eliminates any rubbing between bearing/bell, in order to decrease the operating temperatures of the whole, in addition external diameter protects the bearing from dust and foreign bodies.
The New Design will allow you to use either the Socket Driver 5.5 mm or the classic Allen Wrench 2.5mm, in addition to decrease the weight, microwork was carried out that allowed to have a weight of only 0.05g higher Standard version.
In order to be able to give the 1-year Guarantee on the Hexagons all the Allen Screw haves have been numbered with a unique number, the Guarantee will start from when the products leave our headquarters.
We
recommend that you do not use any type of Threadlock and leave a game
of 0.15/0.2mm in the coupling between Bell and Allen Screw.
We recommend to always use tools in GOOD Condition!!!
It can be used with any engine and mounted on all 1/8 Buggy models.
The weight is of 0.45g
Kit of 1 Pc.
상품의 사용후기를 적어주세요.
게시물이 없습니다
상품에 대해 궁금한 점을 해결해 드립니다.
게시물이 없습니다