상품명 | JConcepts B6/B6D Aluminum Servo Mount Bracket (Blue) [2567-1] |
---|---|
제조사 | PERFORMA RACING |
판매가 | 24,600원 |
적립금 | 246원 (1%) |
배송방법 | 택배 |
배송비 | 3,000원 (50,000원 이상 구매 시 무료) |
수량 |
SNS 상품홍보 | |
---|
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드수량을 선택해주세요.
위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.
상품명 | 상품수 | 가격 |
---|---|---|
JConcepts B6/B6D Aluminum Servo Mount Bracket (Blue) [2567-1] | 24600 (246) | |
총 상품금액(수량) : 0 (0개) |
The JConcepts B6/B6D Aluminum Servo Mount Bracket is machined of
billet aluminum and available in either blue or black colors, this
unique part offers benefits over the stock mount configuration.
First,
the mount fits snug inside the chassis servo mounting area increasing
the support across while the 2 screw mounting locations are beefy in
design and zeroed in for a direct mount to that chassis. Second, the
bracket has locations on each side for included 3x6mm set screws to help
align and maintain servo position during racing conditions, crashes and
hard hits. The set screws are intended to touch-off against the servo
case and provide additional support keeping the servo in the intended
position which helps maintain consistent steering trim.
The
servo mount bracket can be installed without any modifications or
additional equipment in B6 vehicles and immediately brings peace of mind
to the detail oriented racer. With a sleek wrap-around like design,
silver edge chamfering and etched JConcepts.net logo the bracket adds
consistency with aesthetic appeal.
Installation notes –
To
install, completely remove servo from vehicle and remove standard
mounts. With the servo horn already in the correct position, align
plastic shims as previously used on the servo. Install bracket to each
side and loosely fasten factory mounting screws with washers into the 4
locations and snug them. Now, center the servo between the bracket and
install the 3x6mm set screws on each side, use a light amount of thread
locking material and snug them to touch off and keep the servo in place.
Completely clamp the 4 mounting screws on the front side to
lock servo position. Remember to always use a light about of thread
locking material when securing steel screws into aluminum mounts.
Reinstall the servo to vehicle and trim out and check EPA adjustments to
complete assembly.
Features:
상품의 사용후기를 적어주세요.
게시물이 없습니다
상품에 대해 궁금한 점을 해결해 드립니다.
게시물이 없습니다