상품명 | [107704] HUDY CHASSIS DROOP GAUGE SUPPORT BLOCKS 30MM FOR 1/8 OFF-ROAD - LW (2) |
---|---|
제조사 | HUDY |
판매가 | 49,000원 |
적립금 | 490원 (1%) |
배송방법 | 택배 |
배송비 | 3,000원 (50,000원 이상 구매 시 무료) |
수량 |
SNS 상품홍보 | |
---|
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드수량을 선택해주세요.
위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.
상품명 | 상품수 | 가격 |
---|---|---|
[107704] HUDY CHASSIS DROOP GAUGE SUPPORT BLOCKS 30MM FOR 1/8 OFF-ROAD - LW (2) | 49000 (490) | |
총 상품금액(수량) : 0 (0개) |
(click to enlarge) | |
Lightweight chassis droop gauge support blocks are a 뱈ust have� set-up tool for every off-road or truggy racer. The aluminum frame is CNC machined and drilled for super lightweight design and exact the size guarantees accurate & precise downstop measurements. Proper chassis droop is a critical yet frequently overlooked set-up feature of modern 1/8 off-road cars and truggies. It is essential for proper handling to achieve balanced down-travel on each side of the suspension and as such HUDY is the first RC company to develop and produce the first purposefully-designed 1/8 off-road large-size droop gauge support blocks. |
(click to enlarge) | |
Using the support blocks is simplicity itself. Remove the tires from the buggy and using flat HUDY Set-up Board #108202 place the chassis on the support blocks; place the front support block below the servo saver, and place the rear support block below the rear suspension mounting. Using the #107717 Chassis Ride Height & Droop Gauge 0 to -13 mm for 1/8 Off-Road with elevated scales, measure the droop under the wheel axle hex. Use the downstop screws to alter the suspension droop on each side of the car; the shocks should extend out far enough that they do not limit the suspension arm movement. Ensuring equal and proper suspension droop will allow the car to achieve a proper traction level and weight transfer depending on track conditions. Please refer to your buggy뭩 (or truggy뭩) set-up book to learn more about droop adjustment. |
(click to enlarge) |
상품의 사용후기를 적어주세요.
게시물이 없습니다
상품에 대해 궁금한 점을 해결해 드립니다.
게시물이 없습니다