전체상품목록 바로가기

본문 바로가기


현재 위치
  1. 차량(KIT)

[] [#90100089] [미조립품] 1/10 JT4 4x4 Scale Rock Crawler Kit : Jeep M677 Cargo Pickup Truck w/4 Dr. Cab

(해외배송 가능상품)
공급사 바로가기
[#90100089] [미조립품] 1/10 JT4 4x4 Scale Rock Crawler Kit : Jeep M677 Cargo Pickup Truck w/4 Dr. Cab
이전상품 다음 제품 보기 확대보기
대량구매문의
기본 정보
상품명 [#90100089] [미조립품] 1/10 JT4 4x4 Scale Rock Crawler Kit : Jeep M677 Cargo Pickup Truck w/4 Dr. Cab
제조사 CROSS-RC
판매가 465,000원
적립금 4,650원 (1%)
배송방법 택배
배송비 3,000원 (50,000원 이상 구매 시 무료)
수량 수량증가수량감소
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
[#90100089] [미조립품] 1/10 JT4 4x4 Scale Rock Crawler Kit : Jeep M677 Cargo Pickup Truck w/4 Dr. Cab 수량증가 수량감소 465000 (4650)
총 상품금액(수량) : 0 (0개)
바로구매하기

이벤트

상품상세정보

@  디프락/언락  기능과 2단기어가 가능한 차량입니다.


■구성품 : 자동차키트(2스피드미션/리모트 로킹디프) + 모터(540 35턴)
■별매품① : 변속기 + 조종기 + 조향서보 + 변속서보(#97400883) + 로킹디프서보(#97400883) + 케미컬류(그리스+쇽오일)
■별매품② : 배터리 + 충전기 + 조립/도색 용품

■포장규격 : 57.5 x 27.5 x 20cm (규격C 105cm)

 - 구성품 및 사양은 제조사 사정에 따라 사전 고지 없이 변경 될 수 있음
 - 설명에 첨부된 제품 사진은 참조용으로 실제 키트의 구성품은 사진과 다를 수 있음


 ■실제모델

Four dedicated military variants of the FC-170 were manufactured for the U.S. Navy and Marine Corps, under a 1964 contract. Production is estimated to have been between 400 and 700 units, mostly the M677 four-door pickups. A 1963 analysis done by Jeep, concluded that the militarized FC-170s compared favorably to the aging Dodge M37, at least for behind the front-line service. The XM-676 prototype had a 50% larger cargo cube, could carry 12 troops in the back instead of eight in the M-37, had a 700-pound greater load rating, and yielded more than twice the mileage, but Jeep was likely more focused on landing the contract for the M-715 trucks that replaced the M-37.





Description
Cross-RC JT4 scale rock crawler kit


Original 1950's Styling

Main Body : Transparent PC Shell
Remote Locking Diffs
Light : LED with Grande Puissance
Realistic Portal Style Axles
Adjustable Shock Absorber Bracket
Rear Fence Protector
Wheel Arch
Integral Cargo Bracket with Wooden Decoration
Gear Box : 2 Speed Metal Gearbox
Power Shaft : CVD with Metal Cup
Frame : Front Three Linkages & One Horizontal Putter & Rear Four Linkage
Shock Absorber : Scale Aluminum Shocks
Shock Spring : Double Pitch Spring
Differential : Powder Cast 4+2 Gear Differential
Differential Lock : Cable Type Ingrown Differential Lock
Axles : Nylon Axles
Wheel Hubs : Metal
Wheel Tires : 115 x 45mm R1.9 Black Rock Tires
Motor : 540 35T Brushed Motor
Bearing : Rubber Sealed Bearing


Features
The JT4 model originated in the 1950s. It has a very powerful off-road vehicle chassis. The non-load-bearing body structure has evolved many important vehicles in different fields. It can be easily controlled whether it is military or civilian, long-distance rally, and off-road travel.

EMO JT4 features a front engine (motor), door bridge, two-speed, and differential lock.

The chassis is full of materials to meet a variety of different gameplays. A climbing car with a seemingly unpleasant speed is a step-by-step amplification of the motor torque through multi-stage gears, so that the control can be more linear and easier to climb obstacles, so the gear strength Very important, crossrc uses a large number of powder metallurgy teeth made of high-carbon steel raw materials to match with integrated cutting gears. The first-stage deceleration adopts imported nylon material injection-molded large teeth, and has added a limited slip mechanism. The vehicle transmission is both rigid and flexible, and the running noise is also well controlled.

In order to cope with various harsh environments, ABEC3 level (competitive RC off-road vehicle use level) rubber seal cap bearings are selected as standard for all vehicle bearings. Under normal climbing off-road scenes, the bearings are basically maintenance-free.

The shock absorber is an important assembly that affects the attitude and support strength of a climbing car. The cylinder body of the EMO JT4 shock absorber is made of high-quality aluminum alloy CNC processing. The spring adopts a double-pitch integrated spring. Supporting force. After repeated tests in different venues, in line with the front-to-rear weight ratio of the JT4 model, the front spring is 1.1×2.87~4.42lbs (with white dots); the rear spring is 0.9×1.32~2.65lbs; the original car is selected as the damping oil The standard 15W 375CST is suitable for the original vehicle powered mountain climbing and outdoor climbing. If you need to cross at high speed or climb the site, you need to change the damping oil mark appropriately.

The JT4 chassis uses a more simulated Panhard-style multi-link connection with the bridge body, and the steering steering gear is installed at the beam to further simulate the position of the steering gear of the car and better hide the steering gear. In order to improve the climbing performance and the reliability of the tie rod, JT4 uses a stainless steel integrated cutting tie rod, which is directly connected to the ball buckle, eliminating the need for gaskets and screws to install, and at the same time reasonably achieves the effect of lowering the center of gravity of the chassis.

In order to improve the grip performance during climbing, the inner and outer tires of EMO JT4 are made of specially formulated professional materials to achieve the softest level under the premise of ensuring support. At the same time, the RTR and KIT versions are equipped with metal tire wheels as standard. Have both a sense of simulation and texture.

EMO JT4 can also be upgraded and modified according to different gameplay requirements. The following is an introduction to the upgrade parts, which are not included in the kit.


Specifications
Overall Length: 532mm
Overall Height: 279mm
Wheelbase: 313mm
Width: 252mm
Ground Clearance (to axle pumpkin): 52mm
Ground Clearance (to chassis): 87mm
Tire Diameter : 115 x 45mm


Require
Radio Gear with receiver and servo, 4-channels recommended
Electronic Speed Controller
Battery: 6-cell flat or 2S Lipo
Charger: suitable for above battery
Tools and paints to complete R/C model


*Photos are for reference only




상품결제정보

고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.  

무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.  
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.

배송정보

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 3,000원
  • 배송 기간 : 2일 ~ 7일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
    고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.

교환 및 반품정보

교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
  경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
  다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내

교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
  포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
  (예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
  따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
  제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
  (자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)

※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
  (색상 교환, 사이즈 교환 등 포함)

서비스문의

상품사용후기

상품의 사용후기를 적어주세요.

게시물이 없습니다

상품후기쓰기 모두보기

상품 Q&A

상품에 대해 궁금한 점을 해결해 드립니다.

게시물이 없습니다

상품문의하기 모두보기